Bismuth Subgallate BP Ph Eur USP Suppliers Exporters, CAS 99-26-3 or 149-91-7 |
| Muby Group of USA & India is a pioneer manufacturers suppliers exporters & importers of chemicals including Bismuth Subgallate BP Ph Eur USP, Hydraulic fracturing stimulation & oil well production chemicals, Pharmaceutical excipients and API as per IP BP Ph Eur EP CP JP USP NF FCC Food Grade as per monograph, Fragrance & flavor chemicals. Muby Group has several manufacturing facilities and toll manufacturers across the globe. We have offices warehouses and representatives in Houston & Midland Texas and Chicago Illinois USA. |
| Our suppliers have accreditations like FDA - GMP-GLP approval, ISO-9001, ISO-22000 HACCP, Kosher & Halal Certification. We offer Commercial Pure Pharmacopoeia API Excipients Analytical Reagent & Food Grade of Chemicals and do Toll Manufacturing for Oil well drilling fracking fracturing and others. |
----- 
SDS MSDS of Bismuth Subgallate BP Ph Eur USP Manufacturers
Bismuth Subgallate
CAS Number 99-26-3 or 149-91-7, BP Ph Eur USP Commercial & Pure
We supply as under:
Specifications of Specifications of Bismuth Subgallate BP Ph Eur Grade
C7H5BiO6
394.1 -- CAS 149-91-7
DEFINITION
Complex of bismuth and gallic acid.
Content: 48.0 per cent to 51.0 per cent of Bi (Ar 209.0) (dried substance).
CHARACTERS
Appearance: Yellow powder.
Solubility: Practically insoluble in water and in alcohol. It dissolves in mineral acids with decomposition and in solutions of alkali hydroxides, producing a reddish-brown liquid.
IDENTIFICATION
A. Mix 0.1 g with 5 ml of water R and 0.1 ml of phosphoric acid R. Heat to boiling and maintain boiling for 2 min. Cool and filter. To the filtrate, add 1.5 ml of ferric chloride solution, a blackish-blue colour develops.
B. It gives reaction (b) of bismuth (2.3.1).
TESTS
Solution S: In a porcelain or quartz dish, ignite 1.0 g, increasing the temperature very gradually. Heat in a muffle furnace at 600 ± 50C for 2 h. Cool and dissolve the residue with warming in 4 ml of a mixture of equal volumes of lead-free nitric acid and water and dilute to 20 ml with water.
Acidity: Shake 1.0 g with 20 ml of water R for 1 min and filter. To the filtrate add 0.1 ml of methyl red solution. Not more than 0.15 ml of 0.1 M sodium hydroxide is required to change the colour of the indicator to yellow.
Chlorides: Maximum 200 ppm.
Nitrates: Maximum 0.2 per cent.
Copper: Maximum 50.0 ppm.
Lead: Maximum 20.0 ppm.
Silver: Maximum 25.0 ppm.
Substances not precipitated by ammonia: Maximum 1.0 per cent.
Loss on drying: Maximum 7.0 per cent, determined on 1.000 g by drying in an oven at 105C for 3 h.
Specifications of Bismuth Subgallate USP Grade
C7H5BiO6 -- 394.09
Gallic acid bismuth basic salt CAS 99-26-3
Bismuth Subgallate is a basic salt which, when dried at 105 for 3 hours, contains the equivalent of not less than 52.0 percent and not more than 57.0 percent of Bi2O3.
Identification:
A: When heated to redness, it at first chars, leaving finally a yellow residue. This residue responds to the tests for Bismuth.
B: Agitate thoroughly about 100 mg with an excess of hydrogen sulfide, filter, and boil the filtrate to expel the dissolved gas. Cool, and add 1 drop of ferric chloride: a purplish blue mixture is produced.
Loss on drying: Dry it at 105 for 3 hours. It loses not more than 7.0% of its weight.
Limit of nitrate: Mix about 100 mg with 5 mL of 2 N sulfuric acid and 5 mL of ferrous sulfate, filter the mixture, and carefully superimpose the filtrate, without mixing, on 5 mL of sulfuric acid, in a test tube: no reddish brown color appears at the zone of contact of the two liquids.
Arsenic: Triturate 400 mg with an equal weight of calcium hydroxide, and ignite. Dissolve the residue in 5 mL of 3 N hydrochloric acid: the solution without further treatment meets the requirements of the test for Arsenic 211 (7.5 ppm).
Copper, Lead, and Silver: To pass the test.
Limit of alkalies and alkaline earths: Boil 1.0 g with 20 mL of a mixture of equal volumes of 6 N acetic acid and water, cool, and filter. Precipitate the bismuth from the filtrate by the addition of hydrogen sulfide, boil the mixture, and filter. Add 5 drops of sulfuric acid to the filtrate, evaporate to dryness, and ignite to constant weight: the weight of the residue does not exceed 5 mg (0.5%).
Free gallic acid: Shake 1.0 g with 20 mL of alcohol for 1 minute, filter and evaporate the filtrate to dryness on a steam bath, and dry the residue at 105 for 1 hour: the weight of the residue does not exceed 5 mg (0.5%).
Bismuth Subgallate BP Ph Eur USP Manufacturers:
Muby Group
Chemicals Suppliers, API and Excipient Suppliers, Toll manufacturing & Warehouse at Houston & Midland, Texas, USA and India
USA, Canada, Mexico Customers may e-mail: usa@mubygroup.com
Call 1-844-682-9243
Europe Africa Asia India Mumbai e-mail: info@mubygroup.com
Call +91-22-65290116
Suppliers Manufacturers Exporters Importers between USA Canada UAE Europe Korea Russia South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai China India etc.
Best Selling IP BP USP FCC ACS Grades of Chemicals by Anmol Chemicals | |
| |
Other Best Seller Products: | |
Suppliers Manufacturers Exporters Importers between USA Canada UAE Europe Korea Russia South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai China India etc.
Copyright and Usual Disclaimer is Applicable.
If you feed a dog with your hand, it will never bite you. That is the principal difference between a dog and a man.