Strontium Chloride Hexahydrate and Anhydrous Pure and Reagent Grade Suppliers Exporters, CAS 10476-85-4
Muby Group of USA & India is a pioneer manufacturers suppliers exporters & importers of chemicals including Strontium Chloride Hexahydrate and Anhydrous Pure and Reagent Grade, Hydraulic fracturing stimulation & oil well production chemicals, Pharmaceutical excipients and API, Fragrance & flavor chemicals. Muby Group has several manufacturing facilities and toll manufacturers across the globe. We have offices warehouses and representatives in Houston & Midland Texas and Chicago Illinois USA. Our suppliers have accreditations like FDA - GMP-GLP approval, ISO-9001, ISO-22000 HACCP, Kosher & Halal Certification. We offer Commercial Pure Pharmacopoeia API Excipients Analytical Reagent & Food Grade of Chemicals and do Toll Manufacturing for Oil well drilling fracking fracturing and others. Strontium Chloride Hexahydrate and Anhydrous Pure and Reagent Grade Manufacturers
Strontium Chloride Hexahydrate
Anhydrous Pure and Reagent Grade CAS Number 10476-85-4, Commercial & Pure
Strontium Chloride Hexahydrate & Anhydrous SDS Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet1. Product Identification
Product Name & Other Names: Strontium Chloride
CAS No.: 10025-70-4 for Hexahydrate and 10476-85-4 for Anhydrous
EINECS: EC Number: 233-971-6
Molecular Weight: 158.52 for Hexahydrate and 266.6 for Anhydrous
Chemical Formula: SrCl2.6H2O (Strontium Chloride Hexahydrate) and SrCl2 for Anhydrous
Relevant uses and uses advised against (if any): Industrial Manufacturing.
Suppliers: As per letterhead.2. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008Skin irritation Category 2, H315
Serious eye damage/eye irritation Category 2A, H319
Specific target organ toxicity, single exposure; Respiratory tract irritation Category 3, H335Labeling according to GHS & Regulation (EC) No 1272/2008
GHS Label Elements
IrritantSignal Words: Warning
Hazard statements:
H315: Causes skin irritation.
H319: Causes serious eye irritation.
H335: May cause respiratory irritation.Precautionary statements:
P261: Avoid breathing dust/ fume/ gas/ mist/ vapors/ spray.
P262: Do not get in eyes, on skin, or on clothing.
P264 Wash skin thoroughly after handling.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P362: Take off contaminated clothing and wash before reuse.
P302+P352: IF ON SKIN: Wash with soap and water.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P332+P313: If skin irritation occurs: Get medical advice/attention.
P337+P313: If eye irritation persists: Get medical advice/ attention.3. Composition/Information on Ingredients
Product Name & Other Names: Strontium Chloride
CAS No.: 10025-70-4 for Hexahydrate and 10476-85-4 for Anhydrous
EINECS: EC Number: 233-971-64. First Aid Measures
Always seek medical attention after first aid measures are provided.
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Wipe off excess material from skin then immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.
Note to Physician: Symptomatic and supportive treatment is recommended.5. Fire Fighting Measures
Flammability of the Product: Non-flammable.
Products of Combustion: Strontium Oxide and Chlorine or Hydrogen Chloride.
Fire Extinguishing Media: Use any means suitable for extinguishing surrounding fire.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures or when moistened under fire conditions, it may produce toxic or irritating fumes.6. Accidental Release Measures
Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment Cleanup procedures and Storage: Do not inhale dust, vapors, mist, or gas. Avoid dust formation. Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite). Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate as per law.7. Handling and Storage
Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents, bromine trifluoride, 2 -furan percarboxylic acid. Moist strontium chloride and concentrated solutions can corrode steel. When exposed to the atmosphere, it will absorb water and form a solution.8. Exposure Controls/Personal Protection
Airborne Exposure Limits: Not established.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.9. Physical and Chemical Properties
Appearance: White crystals or powder or granules.
Odor: It is odorless.
Odor threshold: Not available.
pH: 5.0 - 7.0 at 50 g/l at 25C (77F)
Relative density: Not available.
Boiling Point: 1250C after losing water
Melting Point: 875C after losing water
Flash point: Not available.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility: It is freely soluble in water.
Viscosity: Not available.10. Stability and Reactivity
Stability: Stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: It emits toxic chlorine fumes when heated to decomposition. It may form strontium oxide and hydrogen chloride and chlorine.
Hazardous Polymerization: Will not occur.
Incompatibilities: Strong oxidizing agents, bromine trifluoride, 2-furan percarboxylic acid.
Conditions to Avoid: Incompatibles.11. Toxicological Information
Toxicity data for anhydrous material
ORL-RAT LD50 2250 mg kg-1
ORL-MOUSE LD50 1036 mg kg-1
Carcinogenic Effects: Not known to be carcinogenic.
Mutagenic Effects: Not available.
Teratogenic Effects: Not available.
Developmental Toxicity: Not available.12. Ecological Information
Toxicity to fish: No information available.
Persistence and Degradability: Unlikely to persist due to water solubility.
Mobility: Likely to be mobile due to water solubility.
Bioaccumulation/ Accumulation: No information available.
Results of PBT and vPvB assessment: No data available for assessment.13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Dispose of container and unused contents in accordance with federal, state, and local requirements. Follow all the pollution control rules.
14. Transport Information
DOT USA & ADR/RID: Not dangerous goods.
IMDG: Not dangerous goods.
IATA: Not dangerous goods.
Canada TDG hazard class: Not dangerous goods.
Europe ADR/RID hazard class: Not dangerous goods.
ICAO/IATA (air) hazard class: Not dangerous goods.15. Regulatory Information
USA:
SARA 311/312 Hazards: Acute Health Hazard.
California Prop. 65 Components: Not listed.16. Other Information
DISCLAIMER: The information and recommendations set forth herein are presented in good faith and believed correct as of the date hereof. It is compiled from various sources and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules or insurance requirements applicable. This MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
Strontium Chloride Hexahydrate and Anhydrous Pure and Reagent Grade Manufacturers:
Suppliers Manufacturers Exporters Importers between USA Canada UAE Europe Korea Russia South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai China India etc.
Copyright and Usual Disclaimer is Applicable.
If you feed a dog with your hand, it will never bite you. That is the principal difference between a dog and a man.
10 October, 2026